Evercoss A7V+ (Plus) Firmware

5.0/5 rating (31 votes)
  • Last update: 24 November 2017
  • Views: 1999

Backup firmware or known Stock ROM for Evercoss A7V+ (Plus) MT6582 Android scatter formatted based on android operating system Jelly Bean 4.2.2 with build number ALPS.JB5.MP.V1.13.

Install Mediatek drivers before updating the firmware using SP Flash Tool so that the phone is recognized by Windows Computer. Do not check preloader, if fail select the Firmware Upgrade in SP Flash Tool and check preloader.

 Waiting for USB Port...
  Set MediaTek PreLoader USB VCOM (Android) (COM34)
  Connecting to Phone,Wait..
  Connected to Phone.
  CPU: MT6582 SW:0001 Ver: CA01
  Downloading Boot8 ...
  EMMC Size: 0x01D2000000
  Flash Type: EMMC
  INT/EXT RAM  Size: 0x20000/0x40000000
  Waiting for USB Port...
  Set MediaTek DA USB VCOM (Android) (COM40)
  Reading preloader...
  Reading mbr...
  Reading ebr1...
  Reading nvram...
  Reading uboot...
  Reading bootimg...
  Reading recovery...
  Reading sec_ro...
  Reading logo...
  Reading ebr2...
  Reading android...
  Reading cache...
  Reading usrdata...
  Saving as scatter file...
>>Done!

BACKUP STOCK ROM + NVRAM

Model Number A7V+
Android Version Jelly Bean 4.4.2
Build Number ALPS.JB5.MP.V1.13
Status Tested
Password smartphones.how

OFFICIAL FIRMWARE

Model Number A7V+
Android Version Jelly Bean 4.4.2
Build Number ALPS.JB5.MP.V1.13
Status Tested
Password smartphones.how

How to Update Firmware Using SP Flash Tool

  1. Download and extract SP Flash Tool v5.1628 for Mediatek phones.
  2. Download and install USB Mediatek Drivers and then then install on your Windows computer.
  3. Run as administrator flash_tool.exe inside the SP Flash Tool folder.
  4. Click Scatter-loading button and browse MT6582_Android_scatter.txt.
  5. Dropdown menu select Download Only.
  6. Uncheck Preloader.
  7. Remove the battery, plug the battery, and then connect the phone to PC while pressing Boot Keys (Volume Down/Up).
  8. Make sure Mediatek Preloader is detected in Ports in Device Manager
  9. The process of updating android firmware will run automatically. Wait a few moments to succeed.

Errors

S_FT_ENABLE_DRAM_FAIL

  1. Check Preloader and select Firmware Upgrade on SP Flash Tool.
  2. Preloader file does not match, you have to download another firmwares or preloader files.

blog comments powered by Disqus