SmartPhones How

The bootloader status specifies the method of flashing Xiaomi phones. If the bootloader status is unlocked we can install ROM via Fastboot Mode, if locked via EDL Mode (Emergency Download Mode). There are 2 ways to check bootloader status as follows:Fastboot ADB Commands​Go to Fastboot Mode. Turn of...

Card Control is a smart platform developed by Ondot System has the ability to control your credit card transaction where, when, who, and how. Safe and secure way to control all your cards, turn on alerts when you make a transaction you're notified and you don't even need payment receipt because of t...

Gmail does not want to lose competition with other email apps, which makes it easy to open addresses, contacts and phone numbers with a single click. Based on customer feedback, Gmail released the latest updates by changing addresses, contacts, and telephone numbers into hyperlinks to save users tim...

Changing the DNS provided by the ISP to the public DNS becomes the best way to improve the browsing experience. In most cases, when you use Public DNS servers with low latency can increase internet speed. Accessing a site that ISP blocked could be the reason why we do it, but I do not recommend it f...

You recently bought a Miracle Box and then install it on Windows 10 64 bit. When you tried Miracle to backup ROM (Read) Mediatek phone, the box show up notification waiting for USB Port like picture in above.​Not running Read or Write process is not caused Miracle Box that you buy damaged. Whereas M...

This guide will help you update the world wide ZenUI firmware your Asus Zenfone 5 T00F (A500CG) device. This can be done to fix :​ Downgrade operating system Lollipop to KitKat. Fixed Asus Zenfone 5 often restarts itself (boot loop). Fixed force close apps. Bring back Nulled IMEI make sure IC Baseba...

You tried to flash/root the Note 4X and failed. As a result, the phone becomes dead boot and can't turn on at all. Trying to enter Fastboot and EDL Mode using Deep Flash Cable did not work.

Enable Qualcomm Diagnostic Mode useful for changing the IMEI or repair baseband your phone using QPST or other tools. There are three ways to activate Diag Mode.

When the firmware update process Xiaomi Redmi 3S to be completed, the error message dummy bin not found appears in XiaoMi Flash Tool. Based on experience, the issue occurs if you use Fasboot ROM MIUI 8 Global Stable v8.1.1.0. Follow the step by step below to fix the dummy.bin not found problem.

I have an Asus Fonepad 7 FE170CG bootloop after update via OTA. Finally I could fix the problem by flashed using UFI Android ToolBox. If you do not have a UFI Android ToolBox software, as an alternative you can use the Asus Flash Tool (AFT) and download raw firmwares.

Xiaomi officially locked the bootloader by reasoned to improve security system. Of course not all devices, only the latest. The impact, we can no longer flash device through fastboot. Another method to flash Xiaomi phones is through EDL Mode. But there are still many Xiaomi users who do not know how to get a device into EDL Mode, the reason is enter EDL Mode is more complicated than going to Fastboot. Sometimes special tools are needed.

The reason why to do the test point when smartphone Max Mi boot loop or hard brick but the bootloader is locked so can not flash through Fastboot Mode.

Xiaomi MI 4C hardbrick / softbrick? Can't enter Fastboot Mode or the bootloader is still locked? You can try flash device via Emergency Download Mode. In this video I use Deep Flash Cable to get EDL Mode and QS HS-USB QDLoader 9008 detected on Ports Windows Device Manager.

Droidboot like BIOS on Windows computer that allows you to access and set up your android system on Asus Zenfone C (Z007) at the most basic level such as hard reset, recovery, update firmware, wipe data and cache, etc. Suddenly, your device can not boot normally just showing a Asus or Intel logo in very a long time. Can not get into Droidboot using various key combinations.

An unlocked phone means a device that is not associated with any carrier, plan and support global frequency bands so it can be used in other countries. When choosing a plan, insert the carrier SIM card into the phone, and you are ready to go. If you decide you want to change your carrier later or want to travel abroad, it's as simple as replacing your existing SIM card with your new SIM and activating your new plan.